2 Piece Chaise Padded Seat Only
Descriptions
How to Measure for a 2-Piece Padded Chaise Lounge Sling (Seat Only)
This is the padded seat sling only, for a 2-piece chaise that has separate back and seat slings. It runs from the hinge to the foot end. We build it from three frame measurements, plus your spline size. Plan on about 10 minutes per chaise style.
- A · Seat Back Width
- B · Seat Front Width
- C · Seat Length
- Spline Size
What you’ll need
- A flexible tape measure (cloth or sewing type) for heights and lengths
- A rigid tape measure for the widths
- Pen and paper, or your phone, to write each number down as you go
- A ruler or calipers if you need to check your spline size
Step by step
- A
Seat Back Width
Measure across the hinge end of the seat, next to the chaise back, rail center to rail center. Round up to the next 1/4″.
This is a seat measurement. It’s the back edge of the seat sling, not the bottom of the back sling.
Enter in the Seat Back Width field, in inches.
- B
Seat Front Width
On a chaise, the “front” of the seat is the foot end. Measure across it, rail center to rail center, and round up to the next 1/4″.
Measure both ends of the seat even if they look the same.
Enter in the Seat Front Width field, in inches.
- C
Seat Length
Lay a flexible tape along one side rail, from the hinge end of the seat, where the seat sling starts, to the foot end. If the frame dips or curves, follow it.
Record to the nearest 1/4″. Measure both sides. If they differ, use the longer number.
Enter in the Seat length field, in inches.
- S
Spline Size
The spline is the rod sewn into each long edge of the sling. It slides into the channel on the frame and holds the sling in place. Your sling must use the spline size your frame was built for.
Pull a short piece of the old spline out of the hem and measure across it. Calipers work best. Then match it to the closest option: 3/16″, 7/32″, 1/4″ or 5/16″.
Choose from the Spline Options menu. No old spline to measure? Contact us before ordering.
Common mistakes that cause a bad fit
| Mistake | What happens | Do this instead |
|---|---|---|
| Measuring the old sling | Sling comes out too big and sags. Stretched fabric hides the true size. | Measure the frame rails. |
| Measuring inside edge to inside edge | Sling comes out too narrow and won’t install. | Measure rail center to rail center. |
| Mixing up Seat Back Width and Back Bottom Width | The seat is cut to the wrong width at the hinge end. | Seat Back Width is the hinge end of the seat. Back Bottom Width is the bottom of the back. |
| Measuring the “front” of the seat at the hinge | The seat is cut to the wrong width at both ends. | On a chaise, Seat Front Width is the foot end. |
| Measuring a curve or the hinge in a straight line | Sling comes out too short. | Follow the frame with a flexible tape. |
| Assuming both ends are the same width | One end is loose and the other is too tight. | Measure and enter both widths. |
| Taking off your own tension allowance | The allowance comes off twice, so the sling is too small to install. | Give us the exact frame measurements. |
| Guessing the spline size | Spline pulls out of the channel or won’t feed in. | Measure the old spline, or contact us. |
| Adding extra for the padding | Padded sling comes out too big and sags. | Give us the same frame measurements as a standard sling. |
Before you add to cart
- Seat Back Width, Seat Front Width and Seat Length in inches
- Widths taken center to center and rounded up to the next 1/4″
- Seat Length taken along the frame
- Spline size matched to the old spline
- Quantity = the number of seats of this exact frame
- Fabric selected in Fabric Search
Questions
Is this the right sling for my chaise?
A 2-piece chaise has a separate back sling and seat sling, usually split at the hinge where the back adjusts. If your chaise has one continuous panel from the top of the back to the foot end, you need a 1-piece chaise sling.
Will a new seat match my old back?
Sling fabric fades in the sun, so a new seat may look brighter than a back that has been outside for a few years, even in the same fabric. If an exact color match matters, consider replacing both with the 2-piece set.
I have several chaises. Do I need to measure every one?
Measure one chaise of each frame style and set the quantity to match. Chaises from the same set can still differ, for example older and newer frames, or models with different back styles. If anything looks different, measure it separately and order it as its own line.
Is the chaise frame included?
No. This is a replacement sling only, made to fit your existing frame.
My numbers look odd, like the top is narrower than the bottom. Is that okay?
Yes. Many frames taper in one direction or the other. Enter exactly what you measured.
Do I measure differently for a padded sling?
No. A padded sling fits the same frame as a standard sling, so use the same frame measurements. Don’t add anything for the padding.


