30-903 - Table Umbrella Hole Ring Set Fits 2" Hole
30-915 - Table Rim Attachment Clip 1.42" X .77" Screws into table leg to attach rim to table leg - Natural Nylon Screw not included.
30-915B - Table Rim Attachment Clip 1.42" X .77" Screws into table leg to attach rim to table leg - Black Nylon Screw not included.
30-916 - Table Rim Clip 1.575" X .760" Nylon Clip Supports Glass and Acrylic Table Tops in Rim - White Nylon Table Rim Clips are used to secure the glass or acrylic top up into the removable table rim. They do not screw on. They are bent to push the top up into the rim.
30-916B - Table Rim Clip 1.575" X .760" Nylon Clip Supports Glass and Acrylic Table Tops in Rim - Black Nylon Table Rim Clips are used to secure the glass or acrylic top up into the removable table rim. They do not screw on. They are bent to push the top up into the rim.
30-917 - Table Rim Clip 1.230" X .765" Nylon Clip Supports Glass and Acrylic Table Tops in Rim - White Nylon
30-918 - Rocker Spring 1/4" x 2 1/2" x 5" Fiberglass Rocker Spring
The 30-918 is only available in black. The black finish was added to the spring plate by the manufacturer because it has an ingredient that makes it possible for the furniture manufacturers to powder coat the chair frames after they are assembled. The black finish will hold an electrostatic charge that attracts the powder. You can spray paint the plates with aerosol paint from a local paint or hardware store. You should be able to find an aerosol paint that will come close to matching the original considering most of the spring plate is not exposed.
Fiberglass Rocker Springs do not have holes drilled. You will need to use the old spring plate as a template to measure and drill hole to fit your furniture.
30-919 - Rocker Spring 1/4" x 3" x 5" Fiberglass Rocker Spring
The 30-919 is only available in black. The black finish was added to the spring plate by the manufacturer because it has an ingredient that makes it possible for the furniture manufacturers to powder coat the chair frames after they are assembled. The black finish will hold an electrostatic charge that attracts the powder. You can spray paint the plates with aerosol paint from a local paint or hardware store. You should be able to find an aerosol paint that will come close to matching the original considering most of the spring plate is not exposed.
Fiberglass Rocker Springs do not have holes drilled. You will need to use the old spring plate as a template to measure and drill hole to fit your furniture.
30-519 - Self-Adhesive Bumpers Clear Vinyl (Hemispherical) 450 on Each Sheet
30-520 - Self-Adhesive Bumpers Clear Vinyl (Cylindrical) 200 on Each Sheet
