Patio Products for your casual furniture finishing needs
CSS Patio Products Dropdown Menu
    Parts Home  ·  Vinyl Attachments  ·  Bumpers & Glides  ·  Threaded Adjustable Glides  ·  Misc. Parts Swivel & Rocker Chair Parts Rocker Spring Plates
    Clear Vinyl Parts  ·  Wrought Iron Inserts  ·  Disk Caps for Wrought Iron  ·  Table Parts  ·  Sling Inserts  ·  Plastic Caps & Inserts  ·  Multi Gauge Inserts
    Adjustment Brackets  ·  Sled Runners  ·  Blank Paint Panels and Holders  ·  Carter Grandle Parts               
 
 
Swivel & Rocker Chair Replacement Parts
 
Item Part No. / Description Qty Add to Quote

30-934 - Heavy Duty Aluminum Rocker Plate Swivel Seat Post
1 1/2" center hole to center hole.
Our new part is aluminum and does not rust. You can paint or powder coat them to match frame of furniture.
Does not include rocker spring plates, rectangular washers, bolts, nuts and plastic seat post bushings. Recommend 1/4" Stainless Steel hex head bolts and lock nuts

30-935 - Keeper Plate
1 1/2" center hole to center hole

30-933 - Straight Heavy Duty Aluminum Swivel Seat Post
5 1/4" hole to hole.
Our new and improved seat post replaces the old rusted seat post. The old part would collect water and cause it to rust out. Our new part is aluminum and does not collect water. You can paint or powder coat them to match frame of furniture.
Does not include bolts, nuts and plastic seat post bushings. Recommend 1/4" Stainless Steel hex head bolts and lock nuts

30-931 - Angled (7.5°) Heavy Duty Aluminum Swivel Seat Post
5 1/4" hole to hole.
Our new and improved seat post replaces the old rusted seat post. The old part would collect water and cause it to rust out. Our new part is aluminum and does not collect water. You can paint or powder coat them to match frame of furniture.
Does not include bolts, nuts and plastic seat post bushings. Recommend 1/4" Stainless Steel hex head bolts and lock nuts

30-932 - Adjustable Rocking Swivel Seat Post
Works with Casual Creations outdoor furniture
Does not include bolts, nuts and plastic seat post bushings. Recommend 1/4" Stainless Steel hex head bolts and lock nuts

30-929 - Seat Swivel
360 Degree Swivel - (Black)
Used on Patio Furniture, Rattan Furniture and Boat Seats
  Click .pdf
diagram for
size and
dimensions

30-922 - Swivel Chair Seat Post Bushing
Tube Size: fits into a
1 5/8" Inside Diameter.
1" seat post will fit into the bushing.

30-928 - Heavy Duty Swivel Rocker Seat Post Bushing
Tube Size: fits into a
1 5/8" Inside Diameter.
1" seat post will fit into the bushing.

30-927 - Swivel Chair Seat Post Bushing
Tube Size: fits into a
1 7/8" Inside Diameter.
1" seat post will fit into the bushing.


30-918 - Rocker Spring Plate
1/4" x 2 1/2" x 5" Fiberglass Rocker Spring Plate

The 30-918 is only available in black. The black finish was added to the spring plate by the manufacturer because it has an ingredient that makes it possible for the furniture manufacturers to powder coat the chair frames after they are assembled. The black finish will hold an electrostatic charge that attracts the powder. You can spray paint the plates with aerosol paint from a local paint or hardware store. You should be able to find an aerosol paint that will come close to matching the original considering most of the spring plate is not exposed.

Fiberglass Rocker Spring Plates do not have holes drilled. You will need to use the old spring plate as a template to measure and drill hole to fit your furniture. It is suggested that you use a drill press to make sure the holes are straight. Re-assemble the parts the same way that you took them apart. There should be a metal plate or washer between the bolt head and the spring plate.


30-919 - Rocker Spring Plate
1/4" x 3" x 5" Fiberglass Rocker Spring Plate

The 30-919 is only available in black. The black finish was added to the spring plate by the manufacturer because it has an ingredient that makes it possible for the furniture manufacturers to powder coat the chair frames after they are assembled. The black finish will hold an electrostatic charge that attracts the powder. You can spray paint the plates with aerosol paint from a local paint or hardware store. You should be able to find an aerosol paint that will come close to matching the original considering most of the spring plate is not exposed.

Fiberglass Rocker Spring Plates do not have holes drilled. You will need to use the old spring plate as a template to measure and drill hole to fit your furniture. It is suggested that you use a drill press to make sure the holes are straight. Re-assemble the parts the same way that you took them apart. There should be a metal plate or washer between the bolt head and the spring plate.

30-920 - Rocker Spring Plate
5/16" x 2" x 7.026" Fiberglass Spring Plate

Fits Woodard Furniture

 


 
 

4201 North Dixie Highway,  Boca Raton, Fl.  33431

 
    Home | Products | Colors | What's New? | Our Company | Terms | Contact Us | Copyright Notices | Dealer Qualification Form | Site Index